Parameter:
● Model: WS2811 LED pixel light
● light source: F8 RGB
● IC Model: WS2811 IC
● Quantity: 100 LEDs /string
● LED Shape: Round
● LED Spacing: Each led spacing is 0.9in.
● Wire Color: Green
● Wire Length: 25.6ft
● Wire Gauge: 22AWG, diameter 0.04in, normal current 3.2A, max 3.7A
● Color: full color, 24-bit
● Gray level: 256
● Operating voltage: DC 12V
● Power: 0.3w/leds
● Waterproof: IP68 waterproof

Kindly Note:
● It comes without power supply and controller. You’ll need a controller such as an Arduino to use them.
● The work voltage of the LED string must be 12V DC. Otherwise, it will be burnt out.
● If you want to hook up more than one LED pixels light, an external power supply is very necessary.
● The package comes with 1pcs 3pin female connector, which is used to connect the power supply and led module.

Package:
● 100pcs/set WS2811 12V LED Pixels Green Module light
● 1pcs 3pin female connector

Product Features

• INDIVIDUAL ADDRESSABLE: Each LED can have its own color and brightness. You can control each LED individually and set it to any color as you want. The brightness of the light can be adjusted.
• COMPATIBILITY: Work great with Arduino, Raspberry Pi or T-1000S and also suitable for SP105E, HC008. Can appear flashing/chasing/jumping/flow water and hundreds of lighting effect with WS2811 controller.
• IDEAL for DIY: Comes with 3-pin waterproof connector on both ends, you can connect the other one led module on both ends. Each pixel can be cut off without damaging the rest pixels. So you can shorten or extend the distance between two pixels if you want.
• IP68 WATERPROOF: Waterproof silicone wraps every LED pixel, protects it excellent well and makes it easy to clean. Widely use for holiday decoration both indoor and outdoors, even underwater.
• WIDE APPLICATION: Can be used for party, wedding, festival and home DIY lighting. It also great as decorative and atmosphere lighting for architectural, bar, club, theater, store, restaurant etc.