BTF-LIGHITNG WS2812B WiFi SP108E Controller Support WS2811 WS2815 WS2801 SK6812 WS2813 SK9822 APA102C etc Almost All LED Strip Module Light iOS/Android App Group Control AP Mode/STA Mode
Product Features
- WIFI Group control. Sync multiple SP108E’s together even if the led strips are in Different areas .It only works with 2.4G WIFI network. DON’T use 5G WIFI network. IOS 10/Android 4.4 or later version .
- Wide Compatibility. Support almost LED IC, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW, WS2813,SK9822,APA102,WS2818, LPD6803, LPD8806, TM1913, UCS1903, SM16703, DMX512,etc. (DO NOT control 5050RGB or RGBW led strip which has no IC )
- Rich Color Modes. 180 kinds of multi-color dynamic modes, 8 kinds of single color modes such as meteor, breathing, wave, catch-up, stack, flash, flow, static. Color, brightness and speed are adjustable.
- Capture image’s color you like.The WiFi controller features creative from-image-to-effect function. It can capture the color of image, create distinctive color effect and synchronize light color with atmosphere of your room.
- User-friendly design. MAX 2048 pixels (Recommand 1500Pixels)in total. Save user setting when power off. DC 5V/DC12V/24V wide working voltage; reverse connection protection; hot swap protection
Loading...
Works great as long as input voltage >5VDC I initially encountered issues with this controller, but all is well now! I am using the BTF-Lighting 5VDC 20A power supply which does not maintain 5VDC under the load of a 5m LED strip. When voltage drops to 4VDC this controller will not respond. (This is likely not be a concern when using 12VDC LED strips.) I was able to work around the low voltage issue by powering the controller from a separate power source — I happened to have a 6VDC power supply with correct polarity on the barrel…
Using for an LED wearables project Works great. I am powering 5v ws2812bâs with a 12v power bank using a step-down converter. The controller gets 12v power (saw other reviews that seemed to indicate 5v to the controller was unreliable) . I split the ground and positive wiring before the controller, also routing power and ground through the step-down, and a capacitor for the 5v lights. Everything works well! (Yay, bc this is my first time working with LEDâs) The app works great (restart your phone after install) and it seems…
Even worse, the lights never turn one