Angled Guitar Wall Hanger Display for Electric and Thin Body Guitars- Classic Finish
The HANG’em HIGH guitar hanger is a patented design made of a two-piece system that is mounted on the wall so you can proudly display and hang your guitar or bass on your wall at an ANGLE. ✔The angle can be adjusted from 15 to 90 degrees. It is designed for both right or left handed electric guitars and basses with bodies from 1 to 3 inches thick, with or without headstocks. Works great for Fender Strats, Gibson Les Pauls, Jackson Kellys, Jackson RR V’s, BC Rich Warlocks, Parker Fly’s, Steinberger’s etc….. ✔ The Hang’em High hanger is the best and safest way to hang your guitar. The instrument sets on Durable Black Foam Rubber Grips that fully cover steel hanger brackets to protect the instrument from scratches. The hanger creates the least amount of stress on the guitar neck than any other guitar wall hanger because the weight is off of the guitar headstock and is placed on the guitar body and mid neck, the same as when you are holding and playing the instrument. You can safely hang and display your guitar without any long term damage and warping to the guitar neck and headstock. You can remove and hang your instrument very easily within seconds with this hanger just as simple as picking it up and setting it down, unlike other angled wall hangers where you have to remove your guitar strap to hang your guitar. With the Hang’em High guitar hanger you can leave the guitar strap on your instrument, ready to pick up and play. This is the perfect gift for the musician in your life to get their room organized and finally get those instruments off the floor and couch. Impress your guests with this hanger displaying your guitar in your studio and home. Display that Autographed Guitar the right way!!! Create that “Rock Star Lives here” look to your home like a “Hard Rock Cafe” then, grab them off the wall and jam! Museums, studios, restaurants, music stores, homes and offices around the country use these hangers.
Product Features
- ✔ STYLE- perfect accessory for guitarists, great for home and studio use for instruments with body thickness up to 3 inches.
- ✔ CONSTRUCTION- Strong Red oak wood base with counter sunk holes for the mounting screws.
- ✔ DURABLE Black Foam Rubber Grips on steel brackets to protect the instrument from scratches
- ✔ SIMPLE INSTALL- installs in minutes- Mounting Hardware included – four 2 inch screws, four drywall anchors rated at 50lbs each.
- ✔ ADJUSTABLE- The hanger can be installed to hang the guitar from 15 to 90 degree angles.
Loading...
Sturdy Hold for my Electric Bass and Guitar I bought three of these (two electric/one acoustic) for hanging directly to wallboard. I did not use the included spiral wallboard anchors. Instead I used toggle bolts and one plastic anchor – see photos for examples of my custom mounting hardware (I used the plastic anchor on the lower hole for the “neck” hanger which acts more as a guide). The hangers that the guitars rest on are screwed into the wood mounting plate and if they’re screwed in too far, they will dig into the…
This thing is really cool. The guitars look much more dynamic when hung … This thing is really cool. The guitars look much more dynamic when hung at an angle, and I don’t have to worry about neck strain on my older guitars. I put these up on the wall with a little accent lighting from a ground lamp, and my favorite guitars are now the centerpiece of the room.As for stability, was a little worried about this at first since it appears that they’re just lightly cradled there. And I live in California where earthquakes are always a possibility. But I grabbed my…